F-15 Metal Art 3D
My 1st Metal Art 3D Build

Use the left and right arrows < > to navigate forward or backward through the photo.

Zooming in on a photo: (This method works on Windows operating systems. I'm not sure how to do it on Mac's).

Opening

The following are pictures of the first Metal Art 3D model I ever tried building. It didn't come out too bad.

If you have never built one, they are fun. You will need a few tools. I used:

  1. Needle nose plier
  2. Flush cutter
  3. Various round shafts to form cylinders and tapered cylinders.
    To form these I used:
    1. A center punch
    2. A taper punch

F-15 Eagle Metal Art 3D

1 of 10

001 F-15 Eagle

2 of 10

002 F-15 Eagle

3 of 10

003 F-15 Eagle

4 of 10

004 F-15 Eagle

5 of 10

005 F-15 Eagle

6 of 10

006 F-15 Eagle

7 of 10

007 F-15 Eagle

8 of 10

008 F-15 Eagle

9 of 10

009 F-15 Eagle

10 of 10

010 F-15 Eagle


Skip's Messy Workbench ⇔ All rights reserved ⇔ Copyright © 2022
Skip's Messy Workbench ⇔ Last updated: February 14, 2022